Forside » Dele & tilbehør» Motor & dele» Krumtapper & plejlstænger » Knastakselsæt RS 521, kædetræk, oliekølet, M8
CAM KIT RS 521 CD O/C M8

Knastaksel · Feuling

Knastakselsæt RS 521, kædetræk, oliekølet, M8

Varenr. FEULING-7262ST

23.649,00 kr inkl. moms
Skaffevare · leveringstid 5-6 hverdage

Passer til 210 køretøjer

  • Harley Davidson FLDE 1750 ABS 2018Type ST1 ; ST1-R · ja
  • Harley Davidson FLDE 1750 ABS 2019Type ST1 ; ST1-R · ja
  • Harley Davidson FLDE 1750 ABS 2020Type ST1 ; ST1-R · ja
  • Harley Davidson FLFB 1750 ABS 2018Type ST1 ; ST1-R · ja
  • + 206 flere

Fitment-tjekket: passer delen ikke som angivet, tager vi den retur. Vælg din motorcykel i garagen for at se, om den passer til din.

Race Series® Camchest Kit with Short Travel Lifters Requires high lift valve springs. Includes: • Race Series® High Volume Oil Pump • High Flow Billet Camplate • Reaper Series® 521 Camshaft • Race Series® Short Travel Lifters •… Læs mere

Beskrivelse fra leverandøren (engelsk)

Race Series® Camchest Kit with Short Travel Lifters

Requires high lift valve springs.

Includes:

• Race Series® High Volume Oil Pump

• High Flow Billet Camplate

• Reaper Series® 521 Camshaft

• Race Series® Short Travel Lifters

• One Piece Pushrods

• Timken/Koyo Cam Bearing

• Rocker Arm Studs and Nuts

• Gaskets

• O-Rings

• ARP Cam/Crank Fasteners

• Washers

• Moly Lube

• Loctite

  • Billet 7075 aluminum oil pump, which is 50% harder and stronger than the factory pump, holding tighter tolerances under temperature
  • Short travel hydraulic lifters have 0.115" of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine
  • Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume
  • 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors
  • 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors
  • 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors
  • 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 15°-25° cooler engine temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 15°-30° cooler oil temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 10-30 more psi of oil pressure for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • Increases oil pressure, scavenge volume and engine oil flow
  • Reduces wet sumping, blowby and oily air cleaners
  • Magnets in oil pump to help protect gears and pressure relief valve
  • Test results show 2 hp gain and 2 ft/lb of TQ gain to the rear wheel on M-Eight
  • Feuling test results show a 50% reduction of engine sump oil level
  • Kit includes: Race Series® high volume oil pump, High Flow billet camplate, Reaper® Series camshaft, Race Series® short hydraulic roller lifters, one piece pushrods, Timken®/ Koyo® cam bearings, rocker arm studs/ nuts, gaskets, O-rings, ARP® cam/ crank fasteners, washers, moly paste and Loctite®
  • Made in the USA
  • Not for '23-'26 models with 121" VVT motor.